sintering speed meaning in Chinese
烧结速度
Examples
- Sintering speed increased greatly with the help of great quantity of heat of the molten iron , the great quantity of heat sent out from the carbonizing reaction and a little quantity of liquid , this sintering type is an instantaneous sintering , the sintering compacting can carry completely in a few minutes , the degree of sintering compacting is very high . ( 6 ) the vc - fe surface composite has high rigidity , it ' s rigidity exceeds 60hrc , under condition of dry sliding friction and overloading
铸造烧结时，过热铁水的巨大热流密度冲击、粉料压坯中的碳化反应的放热以及压坯中少量液相的产生使压坯的烧结速度大大提高，此时属瞬间液相烧结，在十几分钟内烧结过程即可完成，可达到很高的致密化程度。 ( 6 )铸态下vc一fe表面复合材料具有很高的硬度，其铸态硬度) 60hrc 。 - Spark plasma sintering ( sps ) is a kind of new sintering technology for materials synthesis and processing , it has such advantages as high sintering speed , low sintering temperature , it also can retain the origin state of the sintered materials , as such make the sintered materials keep the state of un - equilibrium in this paper , sps was conceived of treating iron covered silicon powder to keeping the origin state of the powder
放电等离子烧结( sparkplasmasintering简称sps )是一种材料快速制备新技术，它具有烧结速度快，烧结温度低，使烧结材料处于远离平衡状态，并能保持材料的原有状态等重要特点。本文设想制各出铁硅包覆粉末，再利用sps进行远离平衡状态的处理，来获得保持原始粉末自然状态的合金块体。 - Some tests for liangang sinter adding bos slag have be done in the laboratory and plant trial . the results show that in the range of bos slag percentage , from 0 % to 8 % , with the increase of bos slag percentage , the sinter speed has been lower , but the sinter strength and productivity of sinter product have been higher , the sinter productivity will be the maximum when bos slag percentage is 4 % ; the siner reducibility has been improved , the normal operation of bof will not be effected anymore because of the circulation of p form bos slag
对烧结矿配加转炉钢渣进行了实验室研究和工业试验，在钢渣配比0 % 8 %的范围内进行的研究表明：随着钢渣配比的增加，烧结速度稍有下降，烧结矿强度、烧结成品率均有所提高，利用系数在4 %左右时达到最大值；烧结矿还原性得到改善；钢渣中带入的p的循环富集不会影响炼钢的现行操作。